Guide to Flashing Android Phones Without a Box Using Miracle Box

Using Miracle Box tool, it is easy to flash Android phones without a box. This method is applicable to all MTK Android devices, with Miracle Box serving as an alternative to the SP Flash Tool.

Miracle Box without a box is helpful for flashing Android phones that failed to be detected or flashed by the SP Flash Tool. Some technicians prefer Miracle Box over the SP Flash Tool because it supports a broader range of Android devices. Unlike the SP Flash Tool, Miracle Box does not require an internet connection.



This method works well on all computer devices. Ensure that your computer is functioning properly with all drivers installed, especially USB drivers. It is recommended to close other programs during the flashing process. The flashing process is compatible with Windows 11, 10, 8, and 7.

MTK Drivers or Miracle Driver Installation Tool:

These drivers are crucial as they facilitate the coordination between the phone and the computer during the flashing process. You can download MTK Drivers and VCom Drivers or the Miracle Driver Installation Tool. It is recommended to use the Miracle Driver Installation Tool as it contains all the necessary drivers required for flashing.

USB Cable:

Use a stable USB cable during flashing. Using a damaged cable might result in your device becoming dead or bricked after flashing.

Stock ROM:

Download the latest Stock ROM according to your phone’s brand and version. Using a different ROM may result in your phone being bricked or failing to start, showing a black or white screen error. Make sure to download the stock ROM from trusted websites.

Android Phone:

Ensure your phone is an MTK Android device. This method is applicable to all Android smartphones using an MTK chipset.

Steps to Flash Android Phones Without a Box Using Miracle Box:

  • Download MTK Drivers/VCOM Driver [Link] or
  • Download Miracle Driver installation tool here (Recommended)

>Launch it

>accept T&O, tick all drivers options then, install all drivers

  • Download Miracle Box here .(Stay updated and use the latest version).
  • Extract the downloaded Miracle Box zip folder using WinRAR or 7zip.
  • Locate Miracle loader.exe within the Miracle Box folder and launch it (run as administrator).
  • Wait for Miracle Box to open and the Dashboard to be fully loaded.
  • Click on the MTK Tab on the Miracle Box dashboard and then select Write.
  • Select the phone’s chipset from the dropdown menu e.g MTXXX
  • Click the folder icon visible to you.
  • In the window that pops up, browse or navigate to the folder where you have the stock ROM firmware for the MTK Android device you wish to Flash and select the firmware for the phone model. It should be in .bin format and then click Open it.
  • Click the Start button.
  • Switch off the phone (with a charged battery inside it) then connect it to the PC via USB cord. Miracle Box should detect the phone almost immediately.
  • Miracle box will begin flashing the firmware, wait till it gets to 100%.
  • Once it gets to 100%, close Miracle box and disconnect the phone.
  • Flashing completed
  • Lunch recovery boot on your phone by holding volume down and power button
  • Scroll a Chinese Menu and tap emmc to do a factory reset or
  • Scroll down a recovery menu and to choose Factory reset by holding volume up and power
  • Select Factory reset
  • Finally, Your Phone Will Reboot and start as normal as new phone at the first time ready for uses.

Leave a Comment